Wake RTA Venturi Drip Tip (11mm internal Dia.)

Hey all!
This is my first ever 3D design. (I've remixed plenty but this one was from scratch)
This Drip Tip was designed to fit the Wake RTA perfectly. Yes, "Venturi" was used for fun :]. It has a height of 15mm, a 16mm outside diameter, a 10.8mm inside diameter (for the base opening that secures it to your RTA), that opening is 4.5mm tall so that it reaches the top of the 'connector' perfectly. Then, of course, there's the 7.5mm shelf that covers the top face of the 'connector' to that condensation flows back into the RTA rather than puddle around the rim. This also means that you can drip manually with reckless abandon should you find that you screwed up your wicking while out and about. My favorite feature is the chamfering that starts at the opening of the 'connector' and extends to the end of the mouthpiece. It terminates with a nice rounded fillet so that you have a smooth surface to rest your lips.

I printed this using Carbon's Cyanate Ester (CE221), which is a highly temperature resistant material. (Think Ultem, those insanely priced 30$ tips). I would also recommend using FormLabs High Temp Resin as it is comparable.

Thanks for the support on taking up this new hobby. There will be more to come. Feel free to tip if you like, it will go to funding more R&D resin.

I hope you make one! PLEASE send a pic in the "I made one section" and include the type of resin and printer you used.

I like to support my vapers so I'd consider designing tips on request if you contact me with dimensions (In mm).