Fox / Coyote Caller

This is a working Fox / Coyote caller except for the membrane . you can use or experiment with some plastic or pet bottle and cut out a small piece as membrane, Use and experiment with the thickness of the membrane for different tones . The membrane is 45mm long and 6mm wide at the tip and a little bit wider at the base maby 9-10mm where the membrane holder clamps it to place, use thin plastic 0.3 to 0.6 for different tonescale for your personal choice. This one was testprinted in anycubic printer with resin so a regular printer with abs plastic maby have to tweak the things a little to make i assembly easy , therefore i upload the cadfiles so you can modify the pipe if needed, if you dont get so tight fittings between the head and the pipes just glue them together its no big deal the pipe just need to be airtight .the pipe is made in 123d design .the thicker membrane the smaller membrane holder and so on, Just added some untested membranes if someone wnts to try them out. There are plenty of pictures just google it and you know how to cut it . Hope this is what your succes need`s Regards Peter