Ultimate CR-10 Housing/Case

This is a casing for the electronics of the Creality CR-10 Printer. I designed it because the stock solution was loud, and i didn't really liked how it looks.

With this case, you can fit 2 pcs of 120mm silent PC fan for cooling the electronics, thus you can get rid of the noisy stock small fans.

This is a multiple piece, large print, and it takes a significant time to print. also the assembly requires attention.

I included 3 different fan grill design, you can use whichever you like for the front and rear, they are kinda universal in this way.

Important!! if you read the instructions included with the files, you know that you need to extend some power wiring inside the case. The other thing i forgot to mention is that, you need to de-solder the beeper from the screen, and solder it back from the other side of the panel. Otherwise it will interfere with the fan.

Feel free to contact me if you have any question!

At this point i'd like to thank Mightynozzle for the fan grill designs.
Here you can check out his profile, and things:
https://www.thingiverse.com/mightynozzle/about
And this is the original Customizable Fan Grill Cover:
https://www.thingiverse.com/thing:2802474