Anet A8 Belt Tensioner and Brace Y-Axis

ANET A8 BELT TENSIONER and BRACE Y-Axis We have installed and tested the parts. Everything fits perfectly. The M5 nut trap is very tight. Position the nuts in front of the traps and then use the 30mm screw to draw them in. When the belt is taught - thread lock can be added to the nut/bolt to secure it in place. Warning - the STL file loads into Cura slightly tilted. Make sure you "Lay-Flat" before you print. We are looking at fixing this in the future. But for now it can be fixed in Cura. Parts List

• 1 - Idler Pully 16 Tooth M3 Bore (Purchase Here)
• 1 - M5 x 30mm Bolt
• 1 - M5 Nut (Purchase Here)
• 1- M3 x 20mm screw (Purchase Here)
• 1 - M3 Lock Nut (Purchase Here)
• 3 Feet - GT2 Timing Belt (Purchase Here)

Digital Sqrt is an open source company and we strive to make all of our files available to all. The STEP and STL files are in the Thing Files folder. www.Digital-Sqrt.com Change Log: 4/3/2018 - add warning 3/26/2018 - Printed and tested. It does it's job well!!! 3/24/2018 - Beta ver. Looks like we have a final design. Once we have it fully tested we will post some pictures. 3/21/2018 - Anet A8 belt is offset by 3mm. That was annoying 3/18/2018 - Updated all parts

• Pully tensioner now has a nut trap and a take an M5 x 20mm
• Improved the throw of the tensioner
• Improved spacing of vertical supports

3/16/2018 - Upload Files for comment by the comunity