Raspberry Pi mount for Monoprice Select Mini with large Pi Camera access

This RPi sleeve design is great - like the original creater pointed out, the RPi stays in the case from friction without the need for an end cap.

I plan to use with with the Raspberry Pi v2.1 camera attached via flex cable. It's really hard to seat and lock the cable in the thin slot, and the clearance is too tight to slide the RPi into the case with the cable attached. So, I made the hole bigger and made sure it could still print without support.

This is my first attempt remixing something; please let me know if it seems that something is wrong.

Update 3/20/18
In addition to widening the access to the PiCam ribbon interface, I also increased the hole size for the microUSB power access. My adapter is a big chunky and didn't fit well in the smaller hole.