6x9 Speaker Hollow Box

***Make sure when you print this to lay each part on their flatt(er) sides. The mount halves and sides have a perfectly flat side, but the base pieces have a smaller fillet on bottom so they print perfectly. The top has an increased fillet so that if this rests in your car it wont leave pressure marks from sharp edges on leather seats. So your basically printing the base pieces upside down.

This is a hollow speaker box for a 6x9 car or marine speaker. Designed for Polk Audio DB691 6x9 3-way speaker. Should work for other models, just be sure dimensions are correct for hole spacing. Mounting holes are 170mm x 120mm apart, measure your own just in case.

Id recommend printing sides with ABS or another high temp material to withstand heat. I printed base and mount with PLA

You will need to assemble the parts together.
-Two base pieces
-Two sides
-Two mounting plate halves THEY ARE SLIGHTLY DIFFERENT