Jet Engine; 2-Spool, Modified Parts

This Modifcation is for;
https://www.thingiverse.com/thing:2549502

In order to make removal of "Special Support" easy, the support design was changed.
The part itself is the same.
The affected STL Files are as follows;

• HPC-6_10-Rotor901ws (Original: Disk portion of HPC-6_10-Rotor01ws.stl)
• HPC-6_10-Rotor902 (Original: Shaft portion of HPC-6_10-Rotor01ws.stl)
• HPT-Rotor901ws (Original: HPT-Rotor01ws.stl)

Printer setting (Recommendation) (1.75mm PLA, 0.4mm Nozzle):

• infill: 100%, Layer Height: 0.2mm, No support, No raft - for Disk portion
• Depend on your experience - for Shaft portion

Post printing:

• Take care to remove the Special Support for damaging of the blade.
• Finish blade edges and surfaces as required.
• Assemble HPC-6_10Rotor901ws to HPC-6_10Rotor902 and glue those.

I hope your work to be much improved.