Raspberry Pi CAM Mount with integrated cable management

This camera mount is for the Raspberry Pi CAM.
The one thing I didn't like about this CAM is the ribbon cable and I wanted a solution that prevented the fragile cable from getting in the way or damaged.
This design has internal passages that hide and protect the cable before exiting at the rear of the beam connected to the base and under the printer to the Raspberry Pi. This was the third design iteration and it worked far better than I had hoped. The cable runs very smoothly without snagging even whilst articulating the arm. It's an optical illusion that the cable follows the "A frame" and was completely unintentional but looks quite good (well, I think so!!)
It's been a long time in the designing/making and resulted in many sacrifices to the 3D printing gods (see last picture!)

You will need 1 of each model although I printed an extra "RPi_CAM_BEAM_100mm_B_v4" to help level the CAM image.

The joints each use an M3 x 20mm Cap Head Screw and nut (design makes this nut captive to make adjustment easier).
The base clamp uses an M3 x 12mm Cap Head Screw and nut (also captive)
The base uses 4 off M4 x 12mm Cap Head Screws into hammerhead T nuts to suit the CR-10 extrusion rails.
The camera enclosure uses 4 off M2 x 8mm Cap Head Screws directly into preformed holes in the back cover.

31-AUG-2019 - EDIT
Added a shortened version of Beam "B" (60mm instead of 100mm).
Note - if you use the 90 degree elbow joint remix from Keln, you won't need my 90 Deg Beam.

20-MAY-2019 - EDIT:
Thank you to BhodiLi for re-mixing a new camera mount for the Logitech C270 cam.
https://www.thingiverse.com/thing:3641406 : C270 Cam Mount

04-MAY-2019 - EDIT:
Thank you to Mams3D for re-mixing a new camera mount with integrated LED ring.

https://www.thingiverse.com/thing:3606521 : Raspberry Camera with LED

01-APR-2019 - EDIT:
Thanks to ErSedavi for contributing the following items:

https://www.thingiverse.com/thing:3528318 : CAM Mount & LED Holder
https://www.thingiverse.com/thing:3528287 : Double 90º beam

15-JAN-2019 - EDIT:
Big thank you to TallNHairyDave for testing the V2 CAM front and rear covers confirming they fit ok.

06-JAN-2019 - EDIT:
A big thank you to the guys who designed additional parts for the CAM Mount. With 3 designs added over the holiday period I thought it would be a could idea to collate them here with a brief description so they are more easily found:

NAinfo
https://www.thingiverse.com/thing:2878989 : Alternative Base using M5 screws

Stingr
https://www.thingiverse.com/thing:2882789 : Alternative CAM Mount for CAM 2 module

benwa1869
https://www.thingiverse.com/thing:3327896 : Alternative CAM Mount for night vision module

Keln
https://www.thingiverse.com/thing:3327670 : New elbow joint with 90 degree twist

TallNHairyDave
https://www.thingiverse.com/thing:3336651 : Alternative Magnetic Base

04-SEP-2018 - EDIT:
I have added a front and rear cover for the V2 CAM module. These models are currently experimental (I don't own a V2 CAM) so please try them if you are interested and feedback any problems with photos and dimensions so I can make the necessary adjustments. I have provided an aditional rear cover without the joint fingers to speed up printing should you wish to try the module without printing the whole thing.

Please refer to my updated instructions regarding the joint clearance and printer settings.

29-MAR-2018 - EDIT:
Apologies - If you downloaded the models prior to today then you will need to download the back cover again. The correct version is Pi_CAM_Back_Cover_v8.stl. I'm really sorry if you have already printed this part but there is a clearance error that I thought I had fixed before I uploaded the parts. Lesson duly learned - do not publish until fully tested (hangs head in shame).