Petsfang Duct Illuminare - LED Light Bar for Tevo Tornado, CR10, Ender or any 40mm Hot End Fan

Petsfang Duct Illuminare

---

LED Light Bar for Tevo Tornado, CR10, Ender or any 40mm Hot End Fan

---

This is an LED light bar designed for the Petsfang Duct. But can be used on almost any 40mm Hot End Fan

---

This is an LED light bar designed for the Petsfang Duct at the URL:

https://www.thingiverse.com/thing:2759439

---

I used (3) 3mm x 20mm Socket head cap screws.
You could use 3mm x at least 20mm Phillips Countersunk head screw as well, since I added a countersink feature.
LED Was a standard 12v 10mm wide string cut 50mm long with 3 LED’s in that segment. Make sure to use the spacers to keep the Light Bar Bracket away from the fan.

I wired the LED’s into the 40mm fan 12v power with a Dupont “Y” connector that I attached to the lights and the fan.

---

***** This is video of the LED mount in actual operations. It is very bright

---

***** *****

---

This is the orientation.

---

***** This picture shows the location of the 3 spacers keeping the light bar away from the fan. *****