Gramazon Remix (with connector rings)

This is the original creators files. The only thing extra is connector rings for printing the horn in pieces and hiding the seem. The connector rings will need to be printed with support. There is also an additional beauty ring for the base for a color accent if desired. The horn pieces also have 3mm and 5mm cross sections on them at the bottom of the print already in the correct print orientation. This was just to help with adhesion so I didn't risk any parts breaking free from the bed and I didn't have to overly squish them down to make them stick. The crosshatch pieces are easily removed after it's printed by just cutting them off. Many thanks to IamStarGoat for sharing this wonderful design! Be sure to tip him generously : )
More info on post processing here:
https://www.htxt.co.za/2018/04/10/3d-print-turns-an-amazon-echo-dot-into-a-gramophone/
And video of audio here:
https://www.youtube.com/watch?v=VM1rO_Kvs60