Silicone Sock for CR-10 Stock Hotend

##Updated to V2! Find it here

This is a mold for making Silicone Sock insulators for the original stock heater block shipped with the CR-10.

You'll need a high-temperature silicone to work with, either a two part mixture, or an RTV single part will work. I used this kind

Other supplies:

• Latex gloves
• Disposable bowl/dish
• Dish Soap
• 2x M3 12mm screws
• Optional but very helpful: 1½" Ratcheting C-Clamp

Check this post for instructions on how to use this mold

Check out my other socks for other hotends:

• Generic OEM E3D Hotend
• Generic Mk8 Hotend
• Generic Mk10 Hotend