3DFabXYZ i3 Large Bed (Electron - Tevo)

I've configured the latest Marlin Firmware 1.1.9 for the Electron i3 6th gen.
https://3dprinting.com/3dprinters/the-electron-3d-prusa-i3-3d-printer-kit-great-package-deal/
The Marlin Firmware is inside the Zip: Configured and Calibrated for my printer running on MKS Base v1.4 with Large Bed "220x280" and Auto Bed Leveling "SN04 inductive sensor". I've also attached all the hardware Mods I have used with this printer.

Latest Marlin firmware 1.1.9 with lots of improvements:
Updated with Marlin Bugfix branch 1.1.x up to 15 Nov 2018

Link to Current Firmware:
https://github.com/AJMartel/Marlin/tree/1.1.x

Added
Preheat settings for PLA, ABS, HIPS, PP, PET,FLEX and NYLON to the main menu.

Tweaked (3DFabXYZ_i3 only)
This Firmware is configured specifically for the MKS Base v1.4
Dual Fans using E1 as second fan control
Added Case LED to pin 11
Calibrated Steps/mm (were slightly off in default Firmware)
Adjusted Preheat constants for what worked the best for me with this printer

Enabled (3DFabXYZ_i3 only)
Auto Bed Leveling - Bilinear 3x4 for Large Bed 220x280
Advanced Pause feature - change Filament easily mid print
EEPROM - store Settings you've made
LCD Info Menu - you can quickly retrieve information about your printer

Current update Marlin 2.0-bugfix https://github.com/AJMartel/Marlin/tree/2.0_3DFabXYZ_Edition
Ver 2.0 does NOT have the added Pre-heat settings.

Good news for everyone using MKS Base 1.4 - Marlin have added my board settings to the main 2.0 branch!
Marlin has also included my 3DFabXYZ i3 example configs to the 2.0 branch!!