Palmiga Business Card Stand

I needed a new Business Card Stand for the 3D Meetup Sweden https://3dmeetup.se/event-2018/ #3DMS2018 #3DMeetup2018 #3DMeetup

STEP-files included so that you can add your own logo. Enjoy!

Hope you will show up on the 3D Meetup Sweden During the 14th and 15th of April 2018!

KR Thomas

‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
Please also check out my unuiqe UV-stable, flexible and conductive filament called ETPU 95-250 Carbon Black filament.

Don´t need the conductivity? Well the conductivity is great for some things but perhaps not your first choice? Then consider this:

This filament will give you some really nice benefits if the conductivity is not an disadvantage for your 3D printed design:

•The material composition eliminates “stringing / webbing” issues.
•The hardness of 95 shore A and the carbon black filler makes for great print abilities.
•The carbon black filler is an excellent UV stabilizer thus the prints are built to last in very harsh environments.
•The matte black surface finish has a very exclusive look.
•The material feels very nice and dry to touch.
•It´s not too stretchy and will do great for timing belts etc.

http://rubber3dprinting.com/
http://palmiga.com/

Follow me on Instagram and/or twitter:
http://instagram.com/rubber3dprinting
https://twitter.com/rubber3dprint

Due to the nature of 3D printing / material used etc... Keep in mind that you use my designs on your own risk and that I am in no way responsible for any damages or injuries.