Hot Wheel Track 180 deg Turn, 30 deg Bank w/ Joiner (Redesign)

This 180 degree turn with a 30 degree bank hot wheel track with joiner has the ability to be mounted via a m5 x 6.7mm heat set brass insert from McMaster. Its input / output are level so there is no drop in this design.

Step and Fusion 360 files are included if you want to modify the design. (Update: 2024-11-18, Removed Step and Fusion files due to online sellers using the designs to sell on platforms like Etsy. Sorry to future visitors of this page. Sharing any models going forward will be rare and sparse due to these abuses.)

E-Commerce Listing: https://maker86.com/shop/ols/products/180-degree-banked-turn-compatible-w-hot-wheels-track
Etsy Listing: https://www.etsy.com/listing/1343806319/180-degree-banked-turn-compatible-w-hot
** Listings are modern versions of this design and resin cast parts from SLA printed masters **

I have also included a split model so that smaller platform printers can print the part in 2 pieces. The split design can be joined by using two McMaster m3 heat set brass inserts and 2 m3x20 cap screws.

Updates:

20190426: Posted an updated design where the ends are solid and similar to the 45's and 90's curves.