MR2 Spyder headlight replacement tab

This is a replacement part for a broken top tab on MR2 Spyder facelift (03+) headlights. For pre-facelift headlights, Toyota sells a replacement tab.

###Instructions

• Print with 100% infill and without supports. You should print in ABS or Nylon. The temperatures inside the care are to high for PLA. This is for the right headlight, invert for the left one.
• Remove the included support from inside the screw cylinder.
• Trim the remaining parts of the broken tab.
• Screw the replacement tab using two 11mm long and 4 mm wide screws for plastic (see picture).

Edit:

I have improved the designed for more strength.