Summary

The design ideia is from emeraldmeadows (https://www.thingiverse.com/thing:2419239) i just made some minor changes to the concept.

The holes in the box and lid are tight enough to use a tap. I use M3 screws for the box and M2.5 for fixing the ceramic sockets to the LID. You can also use Nuts if you prefer but you need to drill open a bit the holes.

The discharger in question is this one:
https://bit.ly/4eAK29U

Print Settings

Printer Brand:

Prusa

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>i3 MK3</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.3mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>30%</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>I printed in ABS with 3 perimeters.</p></div>

Box for Battery Discharger - Aokoda

Box for Battery Discharger - Aokoda

Related Models