Summary

Saw some ideas floating around for shock prep stands. Figured I could knock two birds with one stone and utilize it as a tool holder and a shock prep stand.

I wanted to make it fully collapsible so it would fit in a typical pit bag.

**Update - I made a v2 for easier fitment of parts. The first one is very tight and your printer has to be very accurate for it to fit.

Enjoy!

Print Settings

Printer Brand:

Prusa

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>i3 MK2S</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>.2</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>15-25%</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>This will print exactly as laid out. You may need to trim the rectangular cut outs in the main plate because the first layer is usually thicker so it spreads a little. Just use an x-acto blade to trim and it will pressure fit into the legs. The other plate holds the bottom of the legs to keep them from spreading.</p></div>

Collapsible Tool/Shock Stand

Collapsible Tool/Shock Stand

Related Models