DELETED PUBLICATION MyRCCar 1/10 Truggy rc car. With TITAN Shell, Bumper, Wing and Lights (OLD)

The content of this publication is no longer available. It is kept online just for historic tracking purposes.

Now, if you want to build this model you can do it with OBTS Chassis Upgraded. Print it and show it in Cults3D and I will share with you the Truggy Parts (Shell, Sides, Wing, Bumper and Holders)

Take a look to the rest of my actual designs in my Cults3D profile

OLD --->>>

Hi there!

This time i tryed to make a little less ugly shell to be used with the truggy build. As you can see, the bumper is the same than the buggy build and the wing is a little improved with some reinforcements. I recommend this one also for the buggy build.

Both bumper and wing holders should be printed in TPU so the bumper can make its real work and wing can survive some rolls and hits.

As you can see in the photos and the video I made some led lights holders too. They will be next publication. If you want to see the lights in action, take a look to the Light Show!

The normal size of the Shell hits a little with high closed chassis sides if you try to put it down, so if you want the shell to be as low as possible, better use the widened version of the shell and the windows. They are 10mm wider so you will have extra 5mm on each side of the car to put the shell lower or maybe accomodate some foam.

Hope you like it and start soon making your own 3d printed rc car :)