Align T-rex 600 torque tube bearing puller

This is a puller for the torque tube bearing of the T-rex 600
I made 3 version of the puller: one with a 8mm long M6 nut and a simple U shape, one with the nut and a bridge at the end of the U shape and one with a hole for a M6 ENSAT (M10 external thread) and the bridge
The bridge version works better because it's stronger
The screw is M6, at least 60mm long, and is epoxied to the knob
To push the gear there are 2 caps: the shorter one is for pushing the bearings in, the longer one for pulling them out.
The cap version with insert uses a thick M3 washer, approximately 8mm in diameter and 1.5mm in thickness

I also included the Solidworks files in case someone wants to make his own version for the 450 or 700 sized heli :)

I hope you never use it, but when the time comes it will make your life easier :)