Bicycle Accessory Bar

Bicycle accessory bar version 1 by Ty Harness 2018

inspired by:
https://www.thingiverse.com/thing:586660

I need to raise my front light up over a handle bar bag and brake cables. Maybe you just want to attach more gadgets when you're on the turbo trainer.

My bike has a dia 25mm handlebar at the position I want to clamp and a 36mm wide stem which is what the stl files are set at. Of course use the scad file to make a custom fit for you requirements.

I'm using M3 csk on the clamps.
Use an M5 Socket Head screw to connect both barrels together (if required). You could super glue them to save weight.

I
Parameters:
Dia of barrel, Height of the barrel, thickness of the crank arm, diameter of the clamp hole,

To do:
parametize position of clamp nip connections holes.
parametise oblique clamp hole inc mirroring between brackets

Using pla you can spring the clamp over the bars but i would like to
design split clamp alternative so you dont have to take brakes and grips of your bars.

Extending pieces and barrel dia changer.

Vibration and wind tunnel tests. (or just a road test maybe)