Anycubic i3 Mega Right Extruder Cover for the Gelid Solutions Silent 5 fan, 50mm FN-SX05-40

Another upgrade to silent your anycubic i3 printer. This extruder side panel may mount the Gelid Solutions Silent 5 (and other 50 mm x50 mm x 15 mm) Fan als upper hotend cooler at the stock printhead of the anycubic i3 mega ultrabase printer. The printhead will be ~8 mm wider afterwards, due to the thinkness of the fan, but will still be in the range so you can print the whole printbed.

For this thing you will need a 50 mm fan (up to 15 mm thick) with default fan screws, the plug for the fan (i used the one from the original fan), and two screws: M3x6 and M3x8.

I printed the frame with 0.15 layers using nx2 pla from extrudr. Upcoming prints will show, if pla will resist the heat (;