Anet AM8 Corner Trim (2040)

A corner trim for 2040 extrusion suitable for m5x10 bolts. There are 3 trims, left and right with the Anet logo and one universal type with no logo.

Print orientation as it appears in the 2nd photo for the cleanest look on the logo (one of the holed sides facing the build plate). No support needed but you may have to clean up the holes with a 5mm drill bit.

Update 1 (29-05-2018):

• Increased the length by 5mm on each side and shifted holes over as they were clashing with the x axis extrusion.
• Slightly increased the clearance on the 5mm holes to make inserting the bolts easier.
• Added some chamfers on the edges for a cleaner look.