Caco's ultimate IKEA SKÅDIS (Skadis) Peg Board Collection

After mounting my IKEA Skadis peg board, I was a little bit disappointed with the files on thingiverse I found for this type of peg board.

So, I started designing my own collection of peg board parts. My design goals where that all files can be printed without support material and should be easy and fast to sketch in Fusion 360.

All files should be already oriented for printing without supports.

This is a WIP, some more parts are to be expected in the future.

The dimensions are added to the file names, if usefully, for easy identification that your parts will fit with my files and sorry for the German file names ;) .

The only two things found on thingiverse, which were useful for me and you might find them in the photos, where this one https://www.thingiverse.com/make:496910 and the "classic" SKADIS hook https://www.thingiverse.com/make:496908 .

Changelog:

10-07-2018 - Added magnet holder for four 3mm x 6mm magnets.
11-07-2018 - Added Bosch IXO holder (the four pins needs to be glued)
14-07-2018 - Added holder for a circlip pliers.
15-07-2018 - Added EU plug power supply holder (for example for the Bosch IXO)
16-09-2018 - Added a modified caliper holder for larger digital ones
01-10-2018 - Added holder for a digital multimeter
01-10-2018 - Added holder for a soldering gun
13-10-2018 - Added a jumper wire cable holder
13-10-2018 - Added a hot glue gun holder
22-10-2018 - Added a holder for an battery tester
31-10-2019 - Added OpenSCAD based customizable for creating boxes in various diemensions: caco_ikea_skadis_box_creator.scad
16-12-2019 - Added OpenSCAD based customizable for creating holder for "pistol style" tools: caco_ikea_skadis_pistol_style_tool_holder.scad
10-10-2023 - Added OpenSCAD based customizable for creating holder for USB A memory stick / thumb drives