Tevo Little Monster - Glass Bed Clamp

The bed that comes with the Tevo Little Monster is very uneven so I decided I would add a borosilicate glass plate to level it out until I upgrade the heated bed and base plate. There were a couple of bed clips around already but they either could not be tensioned or affixed to the frame rather than the bed. I also did not want to use the existing bolts holding the bed on as I use these from manual bed level and I needed to make sure the clamp did not interfere with the fan ducts or IR sensor that sticks out past the sides of the hotend

So I created a small clamp with a cam to it that not only held the glass in place but also clamped it down to the bed evenly. I tried some different design that did not require modification to the bed itself but in the end the best design was the one that required a few additional M3 holes to be drilled. I also made a jig to made it easy to drill the holes exactly where I wanted to make life easy.