Grey Goose Vodka Bottle LED Lamp Base

I designed this Grey Goose bottle lamp holder for a friend who owns a bar. The bottle bottom needs to be cut off roughly 1/2" from the base. Youtube has multiple videos about cutting glass bottles, but I used a tile cutting blade on a dremel with plenty of water. The holder is extra deep to give some wiggle room in case your cut is uneven. Then the LED light can be wired through the hole in the holder, and the bottle can be lightly tapped into desired depth in the holder. I had an AC/DC 1A converter laying around, but a battery pack would also work just fine. The LED light i used is 54mm diameter x 20mm deep. I tried finding a link to the actual lights that I used, but china has flooded the market, so just find a close replacement less than 54mm. Feel free to comment with any questions. Enjoy!