June 6, 2018
Description
A simple Chimera part cooler designed for ease of installation and wide printer compatibility. Ver A printed and tested on FLsun i3 clone. Since it mounts right on the heatsink fan, it should* be compatible with almost any printer using the chimera hot-end (?). Please note the orientation of heat-blocks from the images. Also, I insulated my nozzle with some Kapton tape. The second fan was taken from a V6 (clone) and the screws provided were basically self-tapping into the cooler.
I decided to shorten the "nose" and angle the air flow down a bit in Ver B, but Ver A is working for me, so I have yet to print/test Ver B. (Left as WIP because I only use one side of the Chimera and Ver B hasn't been tested).
The hot-end model, e3d_cyclops_asm.stp, is from Chris and can be found here:
https://grabcad.com/library/e3d-cyclops-1
The 30mm fan, 30X30X10 DC fan.step, is from Phil Maddox and can be found here:
https://grabcad.com/library/30mm-dc-fan-1
License:
Creative Commons - Attribution
MCmaks
