June 8, 2018
Description
Print the box and mount the parts...
Flat Fuse Holder: http://www.biltema.se/sv/Bil---MC/Bil-tillbehor/Bil-el/Sakring/Flatsakringshallare-med-uttag-2-st-2000035590/
XT60: https://www.banggood.com/5X-XT60-Male-Female-Bullet-Connectors-Plugs-For-RC-Battery-p-916559.html
Some good cable...
I soldered everything instead of using connectors. Just to save some space.
But you can do it either way... If you solder, remember to fit the cables trough the switch hole before soldering the cables... :)
Use some 1,75 mm filament to lock the lid with the small holes.
License:
GNU - GPL
Snille
