Ultimaker 3 (& 2+) filament drive

I take no credit whatsoever for these designs, they belong to Ultimaker. I just went ahead and converted pretty much all the needed files from their GitHub to STL (except for the bearings, springs, etc of course). I noticed none of my CAD programs except FreeCAD could open the step files, so I made it a little easier by already uploading the converted STLs. Also, an assembly to print the right filament drive is included. I did not include the Flow Sensor Cable Clip since development was discontinued I believe.

The filament drives on the Ultimaker 2(E)+ and Ultimaker 3(E) are basically the same, except for the numbering on the Ultimaker 3.

If you need the latest files you can find them in STEP format on their GitHub, although I highly doubt they will be updated before any Ultimaker 3 follow up, since the filament drives on the S5 are completely different.

GitHub: https://github.com/Ultimaker/Ultimaker3
License: CC-by-NC: http://creativecommons.org/licenses/by-nc/3.0/