Anet A8 Z-EndStop Adjuster

I remixed the motor mount base to have a more solid point for the microswitch to bolt to. I didn't need it to slide back and forth, since I lined up the bolt to press on the middle of the metal arm on the microswitch. Also, I used this carriage mount arm [ https://www.thingiverse.com/thing:2213402 ] because I liked that it used a friction M4 fit on the adjustment bolt. Lastly, for I don't know what reason, I needed to lower were the micro-switch mounted. I didn't have enough adjustment with the M4 bolt. Not sure why. The micro-switch is about 10mm lower.