Monoplane 1914 RC

After I already build several historic airplanes in usual construction I wanted to design a fully printed model.
I thought about something that looks similar like a Fokker. The problem of this kind of shape is the short nose of the fuselage because it makes the plane tail heavy. That means the tail must be very light.
My idea was to cover the tail unit with a printed coat of 0.2 mm. And the rear fuselage should be an open half-timbered construction for additional saving weight.

I made this in cooperation with “Wersy” who has taken the part of the wing. He spend a lot of effort to shape the surface wave-like to give it a natural look. So it looks as if the wing is covered with fabric.

Wersy also designed the Machine Gun Spandau MG08 which you can download here: https://www.thingiverse.com/thing:2971273

Unfortunately, on the first try the ESC failed and on the second try the weather conditions were not good. We had gusty crosswind.
And what's more, the plane was a bit tail heavy yet, and the wheels had too much toe-in.
Anyway, I hope I can make another video soon.

Here you can see the maiden flight: https://www.youtube.com/watch?v=eMCIBVi18x8

Specifications
airfoil: ClarkY modified
wing span: 1550 mm
wing chord: 285 mm
aerodynamic center:
overall weight: 3500 g
wing weight complet:
fuselage weight complet
wing area: 44,18 dm²
wing loading: 75 g/dm²
motor: NTM 35-48, 900KV, 815Watt
static thrust:
battery: 4S, 1P, 4000mA
ESC: JEP 80A
motor camber:
side pull:
propeller: 12 x 8 Elektro