June 23, 2018
Description
This print requires a 1' length piece of 5/16" diameter all thread and 2 corresponding nuts to each printed piece. The bottom has two M4 10mm holes which fit through a pre-cut 140mm fan mount in my case.
There are two different length jack pieces due the the size of the 1060 vs the 1070ti.
Use a nut at the top and bottom of each printed piece and turn to adjust height.
Edit: Added a new top brace to mount an 80mm fan to
License:
Creative Commons - Attribution
TectonicDiscoveries
![NAS ITX PC Case with stackable expansions [MODCASE MASS] preview image](https://wsrv.3dprinterfiles.com/?url=https://media.printables.com/media/prints/590711/images/5398476_0c00c6d9-fdbe-4607-87dd-43629c8d4a8e_5e31701b-0df6-4979-ab25-d1b7d3dc16b8/thumbs/cover/320x240/jpg/212.jpg&w=640&h=640&output=webp&q=100&n=40&default=https://media.printables.com/media/prints/590711/images/5398476_0c00c6d9-fdbe-4607-87dd-43629c8d4a8e_5e31701b-0df6-4979-ab25-d1b7d3dc16b8/212.jpg "NAS ITX PC Case with stackable expansions [MODCASE MASS] preview image")
