June 27, 2018
Description
The 'Boom box' is made out of 3 disposable camera's (you can use more than 3). I used the charge circuit from one camera and the capacitors from all 3 camera's and put them in parallel. Then I added a switch between the battaries and the charge circuit, a switch on the charge circuit itself to start charging the capacitors, and a switch after the capacitors to release the charge in one go (but I cannot recommend this to anybody because the switch welds itself together and gets stuck in one position. you would have to chose an appropriate switch that can handle the power). The 'Boom box' generates more than 2kV (max voltage my multimeter could read) and around 10 amps of current (biggest fuse I could blow with the thing).
Video can be found here: https://www.youtube.com/watch?v=SwPRFpIvChk
More info can be found here: https://hackaday.io/project/159414-boom-box-high-voltage-capacitor-bank
Recommended Tools:
Paypal: https://paypal.me/BrockenBrian
Feel free to take a look at my other designs:
3D printable antweight battlebot: Bulldog: https://www.thingiverse.com/thing:4623536
SpaceX inspired edf rocket: https://www.thingiverse.com/thing:4606751
3D printed high torque servo/gearbox version 2: https://www.thingiverse.com/thing:4547703
UMC - Universal motion controller: https://www.thingiverse.com/thing:4245315
3D-printable Davinci catapult gift card: https://www.thingiverse.com/thing:4067668
Arduino controlled photogrammetry 3D-scanner: https://www.thingiverse.com/thing:3958326
Fully 3D-printable turntable: https://www.thingiverse.com/thing:3723618
RC FPV tank rover: https://www.thingiverse.com/thing:3587738
Fully 3D-printable wind-up car gift card: https://www.thingiverse.com/thing:3308710
3D-printable High torque servo/gear reduction: https://www.thingiverse.com/thing:3292860
'BOOM box' high voltage capacitor bank case: https://www.thingiverse.com/thing:2980012
Subby the interactive youtube subscriber robot: https://www.thingiverse.com/thing:2928254
robot hand || bionic hand prosthesis prototype: https://www.thingiverse.com/thing:2838239
3D-printable linear actuator: https://www.thingiverse.com/thing:2783959
Mini 3D-printable crossbow: https://www.thingiverse.com/thing:2710472
8 legged spider robot: https://www.thingiverse.com/thing:2470882
best 3D-printable bearing: https://www.thingiverse.com/thing:2349065
Have a nice day!
License:
Creative Commons - Attribution - Non-Commercial - No Derivatives
Bribro12
