SRAM GXP Pressfit Bottom Bracket Tool 12mm Rod

I tried to use the tool already here, but found it difficult due to few details:

• 8mm rod doesn't seem sturdy enough for keeping things straight
• the plates were too loose fit for the bearings I got, causing proper alignment problem

So I measured the bearings and the frame BB diameter, designed the plates myself, played with the sizes until I got a snug fit on the cups with bearings and the frame plate. Also decided to use 12mm threaded rod and make the plate shafts a little longer.

The plus was that I already had some big sturdy 12mm penny washers around and once everything was snug enough I used to tool to fit the SRAM GXP Pressfit bottom bracket onto my GHOST Lector 5LC bike and it worked perfect.

I will upload the *.scad file in a few days once i add some comments to it (there is really just 3-4 values that make sense to adjust) and also the picture of the printed and assembled tool. //uploaded 08/07/18