Magnetic Soldering Station

LED Tower

Print the lower part of the LED tower with support.
Super glue the two parts together after wiring it up.
Drill tiny holes in the plastic after inserting the micro USB board.
Screw it down with small screws.
Glue in two magnets.

Tin Dispenser

I have provided a link to the 0.8mm tin i use.
But in case you where wondering, the spool's dimensions are 28.3 x 54.7mm

Vices

The PCB vice has chamfered channels and can hold boards up to a thickness of 3.5mm, but there are times where a normal normal PCB vice just won't cut it, so i also made a knurled version as well.

Rubber feet

While the super strong magnets holds the things down very well, i also added silicone pads to the bottom of everything to assist in holding them in place. See link below.

Links

• 20x10x5mm Neodymium Block Magnets
  https://bit.ly/2NfmxH5 (If you print everything you are gonna need 10 magnets)
• Magnetic Fix PCB Board
  https://bit.ly/2tUM9zR
• Micro USB breakout Board
  https://bit.ly/2lK2YtH
• Touch LED light
  https://bit.ly/2NgVKtE
• Tin used in the dispenser
  https://bit.ly/2KE4B74
• Black adhesive silicone feet (cut to size)
  https://bit.ly/2lJlbrr