This is a E3DV6 Bowden J-head mounting adapter. Is compatible with my
MGN9 X-Carriage - Quick Change. This X-carriage is designed to allow you to quickly release your hot ends for easy services or to switch between 3D print and laser/engraver without having to remove/reinstall the belt everytime. Also minimized the number of bolts that needed to be removed down to 1.
You dont have to remove the bolt completely. Just loosen the bolt a few turn and slide the adapter out. And you need some type of quick connectors for this. Choose your fav on amazon.com.
If you have enough spare parts lying around to make up a complete hotend then why not put them to good use? Make it a spare set of hotend, ready to use in case if your current one needs servicing.
The bracket with fan shroud designed to direct the air upward to avoid cooling your prints so your prints won't warp or crack.
[update 7/9/18]
=============
- Uploaded a remixed version of Mistral cooling fan duct to work with this carriage. All credits to original creator(s)
- Uploaded Base.stl
- Models edited for layers cooling fan mounting
Sndgjaytr
