OpenLOCK Intermediate Step Riser Floor Tiles set - Sci-Fi / Industrial Square Grill (1 inch grid)

This is a collection of Sci-Fi/industrial themed OpenLOCK Riser floor tiles based on a 1 inch grid (actually 25.4mm per grid square, i.e. a 2 by 2 tile (E) is 50.8mm square).It includes three each of the E, EN, F, FN, H, I, IA, K, S, SA, SB, VE and VN floor tiles from the OpenLOCK 8.0 (May 2018) standard from printablescenery.com, one of each at two thirds, one and a third and one and two thirds inches riser heights (actually 17mm, 34mm and 42.5mm respectively). A total of 39 STL files

These tiles are intended to compliment the corresponding pattern of standard floor tiles, 1 inch riser floor tiles and 2 inch riser floor tiles to allow the creation of step-like configurations.

####Printing

These 3D Models were designed for FDM printing with 0.2mm layer heights (and little advantage would be gained from printing at a higher resolution than that).

The models can be printed with minimal infill. As little as 5% infill works.

No slicer generated support should be necessary (as the needed removable support has been pre-designed into the 3D models).

See the PDF file for more information/ advice on FDM printing settings and built in support structure, locations and removal.

####Related Items

OpenLOCK Floor Tiles set - Sci-Fi / Industrial Square Grill (1 inch grid)

OpenLOCK 1 inch Riser Floor Tiles set - Sci-Fi / Industrial Square Grill (1 inch grid)

OpenLOCK 2 inch Riser Floor Tiles set - Sci-Fi / Industrial Square Grill (1 inch grid)

OpenLOCK Hatchway Floor Tiles set - Sci-Fi / Industrial Square Grill (1 inch grid)