Velleman Vertex K8400 Cover

Hey Guys,
simply put there was too much dust accumulating in my printer so I decided to add a cover to it. While there are already many approaches to this topic on Thingiverse, I wanted to do my own one and of course share it with all of you!

Please note that I added a second source for my Remix: LuckyLuzz Design is very similar to mine (he uses the original Velleman parts). I recommend his approach to lasercut the panels, I had a tough time getting mine in shape.

I will add more files and photos in the future (masks for the cutouts and shots of the cover itself) while I progress through the project. For now only the corner files are available!

Edits:

• Take a look at LuckyLuzz Design, he has made some very good fitting covers to the remaining holes
• During the design review process my friend Kai suggested to fixate the top panel with M5 screws instead of using magnets so the cover can be removed from the printer in a single step. I thus build another variant of the corner that will be used on top.
• I added the CORNER_MOD_FIX to my design
  • to cover the not-so-good-looking part of the top corner
  • to have the M5 screws not directly in contact with the poly carbonate
  • design considerations because the printer looked somehow unfinished without the additional parts
• I added a drawing with measurements and two STL files for the cutouts on the polycarbonate panels