XBOX SERIES X/S / XBOX ONE Thumbstick Controller Extension Ver3

Version 03 Thumb stick for a standard XBOX SERIES X/S and ONE controller. This is a one piece design of my Version 02 design. I myself consider the Version 02 design to be the best and is the one I use all the time.

Looking for a PS4 thumbstick use version 02.

Version 01 (XBOX ONE) https://www.thingiverse.com/thing:2343439

Version 02 (XBOX SERIES X/S / ONE / 360 and PS4) : https://www.thingiverse.com/thing:2815021

This thumb stick design has different Cap Diameters and lengths. I also wanted to make available a 1 piece construction, so you can just print it and use it. This has been designed to be 3d printed as the other ones I have done are.

So the the thumb sticks start at a 19mm diameter and go up to 25mm diameter. They also start at a 6mm rise and go up to a 16mm rise. They also come in two different cap designs, concave and convex.

I myself have settled on the 08x21 size and use one concave and one convex.

FILE NAMES:

XO-10x23-CC.stl

XO = XBOX ONE
10x23 = 10mm rise x 23mm Cap Diameter
CC = Concave
CV = Convex

The Thumb sticks just press on your controller and have a very firm grip. I have not had one come off during gaming yet.

The files include a designed support for printing that has to be removed. I just pull it out with a needle nose pliers.

MAKE IT YOURS!!! If you like the black highlights I just used a permanent mark to color the ridges. You also could dip the caps into something like Plasti Dip to get a softer top / color.

PRINTING PROBLEMS??? Please read the Print Settings section.
.

PLEASE:
If you make one of these and use it come back and give it a "LIKE" and show your make and tell us about it and the materials you used.