Finger Splint / protector

The kitchen boss had a small accident with a mandolin slicer (always use the holder!).

The cheapo finger splints in the first aid dept look super dorky, didn't fit well and weren't protecting the sides of her finger tip so I made her this.

I designed it to work with the Velcro one-wrap cable ties but you could certainly use tape.

You can scale it up or down in your slicer to fit your needs. The STL is ~.7" inner diameter and 1.6" in length.

I designed some flats on the side so you can print it sideways to give it the most strength possible in the bendy direction.