Summary

Some 3D-Printers have their electronics mounted in a way, that the reset-button is hard to reach. Though this mount was designed with the Pentachoron in mind, it will work with other 3D-printers too.
I've also added a switch for controlling a light and a XT60-mount.

This mount is designed to work with M5x8mm screws - for 10mm screws use the washers.
Switches used:
https://www.conrad.de/de/goobay-knx-1-kippschalter-250-vac-3-a-1-x-einein-rastend-1-st-701343.html
https://www.conrad.de/de/tru-components-tc-r13-24a1-05-rd-drucktaster-250-vac-15-a-1-x-ausein-tastend-1-st-1587869.html

The XT60 connector might be a tight fit. Use some superglue to secure it.

Print Settings

Printer:

Hypercube

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.3</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>100%</p></div></p>

2020-Mount for external Reset, Light-Switch, XT60

2020-Mount for external Reset, Light-Switch, XT60

Related Models