July 25, 2018
Description
Housing for an LM 2596 module with LED display that measures approx. 57mm x 37mm.
I printed the buttons out of TPE and would recommend doing the same if you have any flexible material. Forgot to mark the positive and negative wire terminals, will fix soon. Negative is on the bottom and Positive is on top. I am mounting this under my enclosure and using the module to step 12V down to 5V to power my RPi.
ATTACHES WITH FOUR M3*16 CAP HEAD SCREWS
License:
Creative Commons - Attribution
VertexMachine3D
