Nest Hello Angle Mounts

This is a 30 and 45 degree angle mount that replaces the 15 degree mount that comes with the Nest Hello. It is made to go in either orientation, so you would need to drill the hole on the bottom, to line up with the security tool unlock hole. I have offset it for the typical printer error so it should be a straight drop-in on the inside surface. It should completely cover the aluminum bracket, which needs to be installed first, prior to mounting the Nest.

Version 1-1: Actually makes it reversible and moves the origin to be in the correct orientation to print.

Version 1-3: Remove material for the bosses on the metal bracket and grow the thickness on the perimeter to have a more rigid print.

Version 1-4: Thickness grown on the perimeter to 1mm to enable more robust printing at the interface.

Version 1-6: Filleted the extended perimeter, reduced depth of mounting holes for better surface finish.

I added a wide base version for those that need to cover a larger area.