Summary

I thought I would raise up my printer so I could put the control box under it. I wanted something stable and strong so I hammered out the design in about 30 minutes. The holes are 5mm and should allow you to mount the feet in place. You will need to print two of each. I did not require supports.

After printing a set and trialing them out. I have gotten a bit of shake when the print bed moves quickly in the y axis. I also have not secured the legs to the bed with nuts and bolts. I am also considering printing braces as I like the added space on my desk.

Print Settings

Printer Brand:

TEVO

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Tornado</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>.25</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>20%</p></div></p>

CR10 TEVO Tornado Riser Feet

CR10 TEVO Tornado Riser Feet

Related Models