February 20, 2020
Description
This is a little desktop case for a ESP8266 NODE MCU V3 Board, and a 1.3" OLED Display.
The backplate is supplied in three differnt versions:
There is a lot of space inside the case, so no problem to add more stuff.
All parts print without any support in the shown orientation.
The OLED display is press-fit. It can be secured with two little drops of Cyano-glue or similar glue.
The NODE MCU board is press-fit into the slots inside the case, pins are directed upwards.
The two parts of the case are screwed together with M2,5*8 screws from the bottom and the back.
License:
Creative Commons - Attribution
Wherzog
