Hey! This is a Remix! If you
Like my version, please go and give the original a
Like as well:
https://www.thingiverse.com/thing:1347129 . It's only fair!
Wall-mounting plaque for Daniel_W's Witcher III Wolf School Medallion.
Wolf head
must be printed at 178mm from the leftmost to rightmost tips (351.53%) in order to fit the indentation in the plaque. Scale up the original "noloop" model (
Pointy Teeth version or
Fixed/Trimmed Teeth version) in your slicer.
The plaque has been divided into 6 parts, each of which fit firmly onto the hexagonal ring on the back, holding them all together. The topmost piece has a keyhole slot in the back for wall mounting.
By default, the Signs pieces fit flush in their slots, though they may be difficult to remove again. Recommend extruding the thickness to 5mm if you want to be able to easily remove them from the plaque.
I will be reprinting the plaque in wood filament (once it arrives) and applying a coat of either Jarrah Red or Teak Brown stain. The Signs will be of gold filament and fit in flush with the surface of the plaque.
Designed entirely in Fusion 360.
Belstone
