PO Eurorack Mounts (experimental)

4 options to mount the pocket operator case (https://www.thingiverse.com/thing:1375818) in a eurorack.

Module height: 3U
Module width: 16HP (Option 1-3), 18HP (Option 4)

1. Case_Front_full_v6_mic_eurorack_v1_rotated
   Version 1 has the PO protruding from the rack with access to the audio jack connectors. The mounting plate creates an overhang and will need support for printing, this may be problematic. Could be improved by a more sophisticated design of the mounting plate.
   Note: This replaces the standard front plate, all other parts can be downloaded from the PO case.

2. Case_Front_full_v6_mic_eurorack_v2_rotated
   Version 2 has the PO recessed in the rack, there are 2 small cutouts for the audio cables. This should print without problems as there is no overhang.
   Note: This replaces the standard front plate, all other parts can be downloaded from the PO case.

3. Update 1 Case_Back_full_v5_eurorack
   Added another option where the backplate is mounted on the eurorack and a normal frontplate can be used. May be difficult to install the frontplate because the backplate will not bend as easily as the normal one. Should print fine, no overhangs.
   Note: This replaces the standard back plate, all other parts can be downloaded from the PO case.

4. Update 2 Case_v6_eurorack_clip_rotated
   Added an option to simply clip in the standard printed case. This will likely need some testing and tweaking to work smoothly. Currently untested. Should print fine, no overhangs. Test result: Prints ok but is too flexible to hold the PO case securely. I will post an updated version soon.

Feedback is appreciated:

• Which version is more practical?
• Is the module width ok or should it be wider?
• How does it fit on the rack? (I don't have a rack to try it myself)