Hulk Piggy Bank better Box (remix)

HANDS OFF!

• Samy -

saving your money is hard.
keeping your saved money safe is even harder.
so who is up to the task of keeping thiefs (and your self) away?
there is only one real option:
THE INCREDIBLE HULK

i liked the already remixed version very much:
Hulk Piggy Bank by brianor01 ( https://www.thingiverse.com/thing:2298997 )

but printing the piggy bank box was challenging:
lots of supports needed and near impossible to remove!

so i reinvented it to be absolutely supportless
by stealing some great ideas from other great models:

1. supportless shape inside:
   Piggy Bank, Coin Bank by MakerBeck ( www.thingiverse.com/thing:17888 )

2. Lid to close and open the box
   Piggy Bank by MakerBot ( www.thingiverse.com/thing:437576 )

=== Important Notes ==

TEXT:
the walls of the box are ~6mm thick. so text can be added to the front (bottom, if you check the original orientation) of the box. just use some www.tinkercad.com magic ;-)
that way, i was able to add the text seen on the pics (not included).

TEST PIECES - Supportless & Tolerances

• if you want to check the supportless feature yourself, i added the most challenging area of the box as a separated part. so you can tweak your printer, until the result is fine.
• the tolerance between the hulk stand and the box can make post-processing necessary.
  in order to prevent that, i also added a test piece of the stand. so you can skale up/down the hulk by 1-2% if needed :-)

SCREWS (screw them) :
i wasn't able to put in the screws as intended, because the holes are right below the arms or near the back muscles. so i had to drill the holes and glue them in - just like i had to glue the bust ontop the box...
alternatively you just print some black/silver screw heads and glue them ontop