Garden Hose Holder

Tired of the hose laying on the ground I made a holder for the spray gun. The clamp has a diameter of 22,5mm and is held together by four M4 screws and nyloc nuts.

The design is basically the same as the one I made for the compressor tool but changed the dimensions to fit the garden hose.

As always, if you find it useful a tiny donation goes a long way to show appreciation. :)

https://www.thingiverse.com/thing:979823

PS: The print was rushed at 145mm/s so the quality of the part in the pictures is not good, but it works. :)