Mountable Eurorack Power Supply from Meanwell RT-50B

This Eurorack power supply is designed around the Meanwell RT-50B which is cheap and easy to find. The bus board adds 5mm LED indicators for each rail and five 16-pin power supply outputs for hooking up any Eurorack module. It includes a front mounted power switch and a power cord clamp for strain relief. Tabs on the sides of the base can be used for mounting it inside of a case or, as it was the design intent, mount it to a breadboard rig for prototyping new modules.

It is designed to be assembled with 10x 6mm M3 screws including the four used to mount the bus board, which you should already have laying around if your into Eurorack. You will want to use an M3 tap to thread the standoffs and cover mounting holes on the base. Tightening a screw in these features prior to assembly also works.

Good to go without any supports but depending on your printing rig you may put a small support under span of the clamp bar. Enjoy and share a pic if you make one!

Follow Moda Modular on Facebook at:

https://www.facebook.com/ModaModular/

or follow us on Instagram @ moda_modular

peace