Inserts for the front of the Petsfang Bullseye duct.

These inserts will fit in the Bullseye Duct that has a recess in the front, so you can add any text or image svg. file as an insert. You can print the insert in contrasting colors and paint it if you wish. I'm all about fun and I can see a lot of fun in this.

The duct file is up so you can print it if you want. The insert dimensions are 10mm x 38mm. It has little clip recesses on the inner sides to hold the insert flush. The insert also needs a chamfer in the top because I had to add a chamfer to the duct in that area to allow for proper printing.

You can clip it in the recess or glue it in.
Have fun and post your makes.

The step file with an Ender Dragon example is included. Make sure you print on the correct side.

The insert takes about 10 minutes to print at .16 resolution. Dave

First Example I've seen. Thank you Armin Thinnes!